Skip to main content

         This documentation site is for previous versions. Visit our new documentation site for current releases.      

This content has been archived and is no longer being updated.

Links may not function; however, this content may be relevant to outdated versions of the product.

Configuring a data page for sourcing from robotic automation

Updated on April 5, 2022

When your automation is built and your case type is configured, you can configure the data page to be sourced from robotic automation.

  1. In Dev Studio, from the Data types explorer, expand the data type, and click the data page that you want to source with an RPA.

  2. In the Source field, click Robotic automation.

  3. In the Robotic automation field, enter the name of the case type that you created.

  4. In the Timeout(s) field, enter the length of time that the data page will wait for data to be returned before timing out.

  5. In the Request data transform field, enter the request data transform to use to provide input data to the robot.

  6. In the Response data transform field, enter the response data transform to use to convert the results returned from the robot to the logical model used by the data page.

  • Previous topic Configuring the Robot Manager host server and authentication profile
  • Next topic Robotic automation status and error handling

Have a question? Get answers now.

Visit the Support Center to ask questions, engage in discussions, share ideas, and help others.

Did you find this content helpful?

Want to help us improve this content?

We'd prefer it if you saw us at our best. is not optimized for Internet Explorer. For the optimal experience, please use:

Close Deprecation Notice
Contact us