INC-140224 · Issue 604005
Corrected SAML SSO error
Resolved in Pega Version 8.3.5
After opening a case from the Pega-FCM portal or after logging in from SSO, closing the Pega window and opening it again resulted in the error "Unable to process the SAML WebSSO request : Violation of PRIMARY KEY constraint %27pr_data_saml_requestor_PK%27. Cannot insert duplicate key in object". This was a missed use case that happens only under the old SAML configuration, and has been resolved by removing a when condition that checks for stepstatus fail for the pySAMLwebSSOAuthentication activity.
INC-144566 · Issue 600857
User lookup list correctly populated when using # tag
Resolved in Pega Version 8.3.5
When typing '#ANewTag @' in Pulse, the user lookup list was not shown. Using '#ExistingTag @' worked as expected. This was a missed use case in work done to improve the performance of pzJquerymentionsInput by restricting REST calls, and has been resolved.
INC-147245 · Issue 612865
Expand Pane icon responds to enter key when using JAWS
Resolved in Pega Version 8.3.6
In an Operator ID rule in Dev Studio, pressing the Enter key when focused on an Access Group expand icon caused the focus on the page to move to the top of the Contact Information frame (top left corner of the Frame). The only way to use the enter key to expand the pane without the refocus was to tab to the arrow icon and then tab a second time before pressing enter. This was traced to the expand caret icon being focussed twice due to the tabIndex for both the TD and SPAN elements holding the caret icon: TD had a focus element for accessibility of the grid, and SPAN had it for the expand pane accessibility. This has been resolved by adding a check condition before adding tabIndex to the first cell in the Grid.
INC-137324 · Issue 584919
Corrected tabbing focus when modal flow has 'disable when'
Resolved in Pega Version 8.3.5
While tabbing through the modal dialog, focus moved to the background screen if there were custom flow action buttons that had a 'disable when' condition. This was caused by the last focusable element being a disabled element, and has been resolved by adding a disabled check in the getLastFocusableElement method that will determine whether element is disabled, and if so it will look for other elements as disabled elements can't be focused.
INC-145902 · Issue 604196
Corrected tab alignment with when expression
Resolved in Pega Version 8.3.5
The tab layout group was not aligned properly in the Case Worker portal when using the Tab Layout Group with Enable stretch for the tabs checked and a when expression on one of the tabs. This was traced to the updateStretchTabWidths API not being triggered in the correct context due to a condition resolving as false. This has been corrected by adding an additional condition to enable the correct resolution and context.
INC-143036 · Issue 599191
SurveyPage loads when ruleset is locked
Resolved in Pega Version 8.3.6
When the ruleset containing the survey rules was locked D_pzSurveyPage did not load and errors were generated. Investigation showed that if the flow was in a locked version, the PopulateShapeNodesFromFlowData activity did not call EvaluateConnectorState, causing the mapping of the transitions for connectors to fail in the activity MapBranchShapeConnectors. This has been resolved.
INC-133951 · Issue 584148
Try catch added for templated refresh when
Resolved in Pega Version 8.3.5
After configuring a refresh when condition on a dynamic layout triggered by changes on D_worklist.pxResults, a component stack mismatch error was generated if client side UI template is enabled. Without templatization it worked as expected. This has been resolved by adding a try catch block to DynamicLayoutGenerator.java.
INC-145170 · Issue 625176
Screenflow returns in perform mode when validation fails
Resolved in Pega Version 8.3.6
After upgrade within v8.3, a screen flow with a customized harness saved-as from a TabbedScreenFlow harness and configured with client side validation disabled was displaying a blank white screen if validations failed when moving from one tab to another tab. This was traced to a try catch block in FormNavigation Rule, and has been resolved by adding a reset mode.
INC-150074 · Issue 613069
Corrected sorting icon accessibility when grid size is not fixed
Resolved in Pega Version 8.3.6
After configuring a table and checking the boxes for Filtering and Sorting and unchecking the fixed (pixel) size grid box, tabbing in to the grid/table using the keyboard did not bring the focus to the sorting icon /header, but instead the focus went to the filter icon. If filter was unchecked and sorting was checked, the focus went to the first row of the table. This was traced to the column headers missing the tabindex attribute when the column headers were not fixed. When the column headers were fixed, tabindex =0 was present for the column header and the sort icon was accessible. This was traced to the Freeze Header value not being updated according to Fixed Size value because it was not a fixed size grid. To resolve this, an extra condition has been added in GenerateCellContent Rule-Utility-Function to be used while checking the Freeze Header.
INC-148154 · Issue 602921
Hot Fix Manager updated to use installation order for schema import
Resolved in Pega Version 8.3.5
Schema changes were not being imported during the hot fix manager DL import process. Investigation showed this was due to hotfixes in the DL being iterated over from newest to oldest, causing older hotfixes to replace the value added to a map by the newer. To resolve this, the system has been updated to use hotfix install order, which considers selected and dependent hotfixes, rather than ordering newest to oldest. This ensures that newer table representations will override older rather than the other way around.