INC-155813 · Issue 629506
SAML SSO redirects to correct URL when application and authentication aliases match
Resolved in Pega Version 8.5.3
Whenever there was a match in the authentication service alias and the application alias, the application alias was replaced with empty after logoff instead of making the authentication service alias empty. For example, given an authentication service with the alias XYZ ("login with XYZ" alias option) and an application name XYZMyOps, the application alias was being changed from XYZMyOps to appMyOps after logoff. As a result, a blue screen error resulted when clicking on button "login with XYZ" again because it redirected to appMyOps, which didn't exist. This has been resolved by removing authservicealias and modifying AuthServiceAliasHelper.adjustPathIfAuthServiceAliasPresent() to change the method for calculating the pathinfo to string tokenizing
SR-C84361 · Issue 437599
Added handling for better recovery and reset when using 'When' conditional row deletion
Resolved in Pega Version 8.3
Given a 'When' condition configured so that a specific row could be deleted, trying to delete another row resulted in the expected error indicating it was not possible to delete that particular row. However, attempting to then delete the row with the 'When' condition caused the same failure error to appear which could not be cleared through clicking on the Refresh button for the section. In order to resolve this, handling has been added for a scenario where Obj-Delete fails and the record is marked for deferred commit. In this situation, the system will revert Obj-Delete by way of Obj-Save-Cancel in @baseclass.pzDeleteRecord so that a subsequent Obj-Delete does not pick up the previous record and fail again.
INC-160767 · Issue 628374
Email headers correctly mapped when using MSGraph
Resolved in Pega Version 8.5.3
The value of "Send Date" was not correctly populated when using MSGraph instead of IMAP, causing the Email Listener to fail. Microsoft populates the "sendDateTime" field in the JSON with the value of the RFC 822 email header "Date:", but this value was not being passed to Java object of type "Message" as part of the query. To resolve this, ReceivedDateTime and SentDatetime have been added in the select filter of getMessagebymessageID.
INC-154855 · Issue 616003
Updated expression handling when not using client side validation
Resolved in Pega Version 8.5.3
After upgrade, a declare expression used to calculate the end date when creating a schedule case was not populating the result. This was traced to a missed use case for evaluating expressions when 'Enable client side validation' is unchecked, and has been resolved.
SR-C93726 · Issue 435285
Work status icons work correctly when using localization
Resolved in Pega Version 8.3
The pyWorkAssignmentStatus control was not displaying the status flags/icons for localized work status values due to a match failure caused by the system using the localized text for the pyAssignmentStatus to perform a string comparison against the hard-coded English values. To correct this, the control pyWorkAssignmentStatus has been modified to run the comparisons with the new string "assignmentStatus" instead of with the localized text.
INC-147245 · Issue 612868
Expand Pane icon responds to enter key when using JAWS
Resolved in Pega Version 8.5.3
In an Operator ID rule in Dev Studio, pressing the Enter key when focused on an Access Group expand icon caused the focus on the page to move to the top of the Contact Information frame (top left corner of the Frame). The only way to use the enter key to expand the pane without the refocus was to tab to the arrow icon and then tab a second time before pressing enter. This was traced to the expand caret icon being focussed twice due to the tabIndex for both the TD and SPAN elements holding the caret icon: TD had a focus element for accessibility of the grid, and SPAN had it for the expand pane accessibility. This has been resolved by adding a check condition before adding tabIndex to the first cell in the Grid.
INC-151952 · Issue 609340
Expand Pane icon responds to enter key when using JAWS
Resolved in Pega Version 8.5.3
In an Operator ID rule in Dev Studio, pressing the Enter key when focused on an Access Group expand icon caused the focus on the page to move to the top of the Contact Information frame (top left corner of the Frame). The only way to use the enter key to expand the pane without the refocus was to tab to the arrow icon and then tab a second time before pressing enter. This was traced to the expand caret icon being focussed twice due to the tabIndex for both the TD and SPAN elements holding the caret icon: TD had a focus element for accessibility of the grid, and SPAN had it for the expand pane accessibility. This has been resolved by adding a check condition before adding tabIndex to the first cell in the Grid.
SR-C89541 · Issue 430728
Case Manager email correspondence opens when encryption and obfuscation are used
Resolved in Pega Version 8.3
If the urlEncryption (true) and submitURLObfuscation(required) settings were enabled, it was not possible to open correspondence emails sent in Case Manager portal. No issue was seen when submitURLObfuscation was set to "optional" (which allows the server to accept URLS with either clear-text or obfuscated strings). Investigation showed the obfuscated values for pyActivity were not part of the HTTP request generated when the Data-Corr-Email attachment is clicked, leading to the system blocking the pop-up window request. Because bEncryptURLs, which is being set in the fragment DesktopWrapper_Variables, is not available in the harness context, the SafeURL method toURL therefore was not encrypting the URL. This has been resolved by setting both bEncryptURLs and pega.ctx.bEncryptURLs to true in the HTML fragment.
SR-D16327 · Issue 487448
Updated logic for Bulk Upload count when background processing is used
Resolved in Pega Version 8.3
When multiple items were queued as part of "Bulk Upload" and the "Transfer To" operation was used with "BULK PROCESS in BACKGROUND", discrepancies were seen in the email received. For example, if two items were selected for transfer, email notifications stated that 1 item was selected and 1 item was processed instead of 2. This was traced to using 'process in background': when selected during bulk processing, the first record is processed in the foreground and remaining records are processed in the background. When the system sent the email notification once the background process was done, the total records computation was not considering the foreground-processed record, and the count was off. The timing logic has been updated to account for the foreground record to resolve this.
SR-D16327 · Issue 488145
Updated logic for Bulk Upload count when background processing is used
Resolved in Pega Version 8.1.6
When multiple items were queued as part of "Bulk Upload" and the "Transfer To" operation was used with "BULK PROCESS in BACKGROUND", discrepancies were seen in the email received. For example, if two items were selected for transfer, email notifications stated that 1 item was selected and 1 item was processed instead of 2. This was traced to using 'process in background': when selected during bulk processing, the first record is processed in the foreground and remaining records are processed in the background. When the system sent the email notification once the background process was done, the total records computation was not considering the foreground-processed record, and the count was off. The timing logic has been updated to account for the foreground record to resolve this.