SR-D3371 · Issue 439507
Association Resolver updated to handle filters created on secured properties
Resolved in Pega Version 8.1.6
After creating a Report Definition in a class (Example Class A) that had an Association in that report with Class B, no results were generated from the report when an Access Control Policy and Access Control Policy Condition were created for Class A and Class B where the Class B had an ACPC with a Value field that referred to a Data Page or clipboard page property. Investigation showed the system was not able to resolve the actual value of the datapage property in the generated SQL query due to Association Resolver resetting the filter value (the Page reference in this case) of a filter that is created on a secured property. This has been corrected by updating Association Resolver to not reset the right operand for a filter that is created on a secured property.
SR-D13388 · Issue 485168
Handling added for minor case creation errors
Resolved in Pega Version 8.1.6
When creating a case, if any step status failed due to a non-critical reason which did not impact case creation (for example, a mandatory parameter was missing from the data page), that failure state was propagated to SaveNew and ultimately to the case creation API. As a result of this failure report, no case ID information would be reported back to the requestor even though the case was created, and the API responded with status 500 - internal service error. This has been resolved by removing the StepStatusFail check from pzCreateCaseInternal so that non-breaking errors will not result in a 500 error, and a check has been added for page messages in svcAddWorkObject and svcPerformFlowAction so that validation messages are returned.
SR-D91038 · Issue 553166
Corrected report with combo chart in Case Manager portal
Resolved in Pega Version 8.4.2
After adding the required columns a report in the report viewer and then adding a combo chart and dropping the summarized column on the y-axes and group by column on X-axis, clicking on "done editing" generated the error "pyUI.pyChart: You must have at least two Aggregate Columns in the chart series .pyUI.pyChart.pyDataAxis(1).pyChartOutputType: A Combo chart requires at least 1 Chart Type be a Column". Investigation showed that the second DataAxis page was getting deleted in the pzCleanChartDataAxis activity, causing the validation to fail. This has been resolved by adding a 'when' rule to "pzChartIsSingleY" that checks for "SingleYAxisClustered" chart and refers the same in pzCleanChartDataAxis to skip the data axis deletion.
SR-D94505 · Issue 553018
Toggles added to allow file listener performance improvement
Resolved in Pega Version 8.4.2
In order to offer flexibility in improving the performance of file listener CPU usage while processing intake files, rsf.setSaveIntermediateState( true ) has been replaced with rsf.setSaveIntermediateState( listener.getListenerProperties().getAttemptRecovery() ) in FileActionImpl. This change allows the option of not selecting the setting for attempting recovery on the file listener rule-form, which then would skip the intermediate save state normally performed per record/per file in case recovery is needed, thereby speeding up the processing. A toggle has also been added to see whether the system should bypass the ListenerState check at the end of each record. To use this, set the Dynamic System Setting "listener/skipListenerStateCheck" in the "Pega-IntegrationEngine" ruleset to true.Additional Installation Instructions Please create/set the Dynamic System Setting "listener/skipListenerStateCheck" in the "Pega-IntegrationEngine" ruleset as true.
INC-172675 · Issue 649455
Configuration added for extending queue processor timeout
Resolved in Pega Version 8.7
Alerts for queue processor (QP) items which took more than 15 minutes to run could result in the system marking the node as 'unhealthy'. In environments with Pega Health Check enabled, this would shut down the node gracefully. It was not possible to change this default as it was hardcoded. In order to support systems that may have custom processes that run beyond 15 minutes, a a new setting has been exposed that allows configuration of the interval after which a node with long-running queue processor is marked as unhealthy and is restarted. By default this remains 900000 milliseconds / 900 seconds / 15 minutes, but it may be adjusted up to 24 hours to avoid premature node shutdown. The stale thread detection mechanism will take that setting into account and use the provided value or default to 15 minutes if the value was not provided. In addition, the threshold's units in the UI have been changed from ms to seconds.
INC-185322 · Issue 668321
Configuration added for extending queue processor timeout
Resolved in Pega Version 8.7
Alerts for queue processor (QP) items which took more than 15 minutes to run could result in the system marking the node as 'unhealthy'. In environments with Pega Health Check enabled, this would shut down the node gracefully. It was not possible to change this default as it was hardcoded. In order to support systems that may have custom processes that run beyond 15 minutes, a a new setting has been exposed that allows configuration of the interval after which a node with long-running queue processor is marked as unhealthy and is restarted. By default this remains 900000 milliseconds / 900 seconds / 15 minutes, but it may be adjusted up to 24 hours to avoid premature node shutdown. The stale thread detection mechanism will take that setting into account and use the provided value or default to 15 minutes if the value was not provided. In addition, the threshold's units in the UI have been changed from ms to seconds.
INC-186898 · Issue 670313
Configuration added for extending queue processor timeout
Resolved in Pega Version 8.7
Alerts for queue processor (QP) items which took more than 15 minutes to run could result in the system marking the node as 'unhealthy'. In environments with Pega Health Check enabled, this would shut down the node gracefully. It was not possible to change this default as it was hardcoded. In order to support systems that may have custom processes that run beyond 15 minutes, a a new setting has been exposed that allows configuration of the interval after which a node with long-running queue processor is marked as unhealthy and is restarted. By default this remains 900000 milliseconds / 900 seconds / 15 minutes, but it may be adjusted up to 24 hours to avoid premature node shutdown. The stale thread detection mechanism will take that setting into account and use the provided value or default to 15 minutes if the value was not provided. In addition, the threshold's units in the UI have been changed from ms to seconds.
INC-196389 · Issue 690786
ConfigurationReconciliationTask updated for greater compatibility
Resolved in Pega Version 8.7
After updating from Pega 8.3 to Pega 8.6, models which previously had learning and performance AUC greater than 0.7 reported an AUC of 0.5. This was traced to the update handling in ConfigurationReconciliationTask. AdmRuleBrowser does not perform ruleset resolution, so all rules were returned, for example the rule for model A in both the 08-01 and 08-03 ruleset. The system then iterated over all of the adaptive model rules returned by AdmRuleBrowser in order to assess whether a configuration update was necessary. The condition to update the model rule was met when either the config key did not exist (indicating a newly added configuration) or the model rule was "old" (version <2). For models generated in Pega 8.3 or earlier the version number for all rules must be 1, and the update to Pega 8.6 therefore caused the ConfigurationReconciliationTask to be applied to all adaptive model rules. To resolve this, the configuration update check in ConfigurationReconciliationTask has been removed.
INC-201335 · Issue 690733
ConfigurationReconciliationTask updated for greater compatibility
Resolved in Pega Version 8.7
After updating from Pega 8.3 to Pega 8.6, models which previously had learning and performance AUC greater than 0.7 reported an AUC of 0.5. This was traced to the update handling in ConfigurationReconciliationTask. AdmRuleBrowser does not perform ruleset resolution, so all rules were returned, for example the rule for model A in both the 08-01 and 08-03 ruleset. The system then iterated over all of the adaptive model rules returned by AdmRuleBrowser in order to assess whether a configuration update was necessary. The condition to update the model rule was met when either the config key did not exist (indicating a newly added configuration) or the model rule was "old" (version <2). For models generated in Pega 8.3 or earlier the version number for all rules must be 1, and the update to Pega 8.6 therefore caused the ConfigurationReconciliationTask to be applied to all adaptive model rules. To resolve this, the configuration update check in ConfigurationReconciliationTask has been removed.