Flow form
Process Modeler — Editing a Split For Each shape
|
|
The Split For Each shape 
provides a form of searching or enumeration over the pages in a property.
Use a Split For Each shape to iterate over the pages of a Page List or Page Group property. For each page, you can conditionally start a flow execution for the work item.
Processing in the original flow pauses while the subprocesses execute. Processing in the original flow can resume after all the subprocesses complete, after some complete, or after the any one of them completes. For an example, see the standard flow Work-.StandardApprovalsAll or similar "approvals" flows.
indicates that one or more tickets are defined on the Split For Each shape. Assigned ticket names appear beside this icon on the flow.
At runtime, this shape processes the work item's embedded Page List or Page Group properties; the embedded pages must exist before the Split For Each shape is reached.
On the flow diagram, you can add a shape to a flow in one of three ways. Validation of the added shapes occurs when you save the flow.
on the toolbar to display a drop-down shapes menu that will remain open until you close it, facilitating the process of rapidly adding multiple shapes. Click the window title bar and drag the submenu to another area of the screen, as needed.
on the toolbar Flow Shape palette to display a drop-down shapes menu.1. On the flow Diagram tab, open the properties panel using one of the following:
.2. When the Properties panel appears, enter a name, no longer than 128 characters, to the right of the shape title (Split For Each: [Split For Each]). Choose a name meaningful to application users who see this on the work item history display, the breadcrumbs control (for entry points), and the Where-Am-I? diagram. The system automatically enters the name in the Specification section. The shape name is only descriptive; it does not affect runtime execution.
This name also appears inside the Split for Each shape on the diagram. You can edit the name by double clicking the shape's label on the diagram. To change the name after you have exited from the properties panel, click the name, and type over the highlighted text.
3. Complete the fields as described in the tables below. (To edit the shape properties after you save the Flow form, open the Diagram tab, right-click the shape, and select Properties.)
4. Click OK to save edits and close the panel.
5. Click and drag the shape as needed to position it in the flow.
6. Connect an incoming connector to the Split For Each shape.
7. Connect an outgoing connector from the Split For Each shape.
A Split For Each shape may be deleted from the process flow. Right-click the Split For Each, and select Delete from the drop-down menu.
You can also select the Split For Each and do one of the following:
on the toolbar.
hen a shape is deleted, the connectors remain on the canvas.Cut or copy shapes from a flow and paste them within the same flow or in other flows within your user session.
to cut a selected shape(s) and connector(s). Cut differs from Delete in that cut shapes appear faded on the canvas until you paste them elsewhere. You can also cut selected shapes using the right-click canvas menu, or the shape drop-down menu.
to place selected shape(s) and connector(s) in the copy buffer. You can also copy selected shapes using the right-click canvas menu, or the shape drop-down menu.
to paste selected shape(s) and connector(s) elsewhere in the flow or in other flows within your user session. You can also paste selected shapes using the right-click canvas menu, or the shape drop-down menu.Complete the Details section to select the join type, process flow type, when condition rule, and the process flow to use at runtime.
Field |
Description |
| Join |
Select
When you choose
|
| Page Property |
Identify the property of mode |
| Class |
Identify the class of the embedded pages. Usually, this value does not usually need to be altered as the class appears when you enter Page Property. |
| Filter Flow Rule By |
Select |
| Flow Rule |
Select a flow (the second key part) for the Foreach over an embedded page list. At runtime, the system uses the value in the Class field to find the flow. |
| When |
Optional. Select a when condition rule. The system uses the class of the embedded page as the Applies To key part of the when condition rule. At runtime, it evaluates this when condition rule once for each page of the property in the Page Property field, and a starts a subprocess for any page for which this rule evaluates to For example, you can use this field to start subprocesses only for subscript values "OH" and "VA" of a |
| Parameters |
The Flow Rule you select may accept input parameters that will appear in the box below. Supply a value for each parameter. PRPC validates these parameter values when you save the flow, unless the flow in is Draft mode. |
| Exit Iteration When |
This field appears only when you select If this field is not blank, at runtime the system evaluates this when condition rule once for each page of the property in the Page Property field. If false, no additional flow executions are started and the flow is resumed. For example, you can use this field to exit when a top-level work item property was set to 6 or less, where the subprocess executions contain assignments recording committee member votes, and 6 yes votes count as a majority. |
| Exit Iteration |
This field appears only when you select
If this field is not blank, at runtime the system evaluates this when condition upon completion of spawned processes. If true, the Split For Each iteration is exited and flow processing continues. If false, the Split For Each continues to wait for remaining spawned processes to be completed. For example, you can use this field to exit subprocesses only when a top-level work item property was set to 6 or less, where the subprocess executions contain assignments recording committee member votes, and 6 yes votes count as a majority. |
| At least... path(s) |
Enter the minimum number of paths that must result in a specific status to exit the split and resume processing in the original flow. For example, if a given number of users choose a specific flow action that results in a specified flow status, then processing in the original flow resumes. |
| Result with flow status | Identify the status that some flows must reach in order to exit the split and resume processing in the original flow. |
| Application | Optional. Select the name of the application that you want to link to the shape. |
| Work Type | Optional. Select the name of the work type for the application that you want to link to the shape. |
| Audit Note |
Optional. Text you enter here appears in the history of the work item, recording the subprocess started by this Split For Each shape. (If you selected
|
| Entry point |
Select to indicate that this Split For Each shape is an entry point, which provides a navigation link for that step. The links appear after you complete a step. For example, after you complete Step A and go to Step B, a link appears to Step A. Links are displayed according to the type of harness you use:
If you click a navigation link for the Split For Each shape, you return to the first step (assignment) and the split runs again. You can click the links in the tree and breadcrumb harnesses to return to any step (subprocess) within the flow.
By default, the box is cleared. |
| Only going back |
Optional. This checkbox appears only when you select the Entry Point? checkbox for the Split For Each shape. If selected, users cannot click the Split For Each shape's tab or tree node until they have reached it or passed it. Users cannot jump forward to this step.
By default, the box is cleared. |
| Post action on click away |
This checkbox appears only when you select the Entry Point checkbox. Select to run flow action post-processing when you click away from this entry point. By default, the box is cleared. |
| Subprocess has entry points |
In a regular process flow, this field appears only when you select For example, assume that a Split For Each shape calls a flow containing two assignments ("Review" and "Approve) and the pg1 -Review - Approve - pg2 - Review - Approve — pg3 - Review - Approve.
By default, the box is cleared. |
| Label property |
Optional. This field appears only when you click the Subprocess has Entry Points checkbox. Enter the property for the navigation labels used on subprocess tab headers or tree nodes. |
The Page group interaction settings section appears only when you select Iterate in the Join field. Complete the fields to select the subscript order, indicate whether the subscript requires an exact match, and to specify whether to start a subprocess for subscript values not yet selected..
Field |
Description |
| Subscript Order |
Optional. Enter the literal text of (or an initial portion of) a subscript value that may be present in the At runtime, a subprocess is started, one at a time, for each match of the first row. Then a subprocess is started for each match of the second row, and so on. (This requires repeated scanning of the pages in the group to access subscript values.) |
| Exact Match |
If the Subscript Order field is not blank, click the checkbox to require an exact match. For example, the value M does not exactly match any state code. |
| Process remaining pages |
If the Page Group Iterations array is not blank, select to indicate that a subprocess is to be started for any subscript value not yet selected (subject to the Abort Iterations when? result.) For example, if the subscript values correspond to state codes and the array contains the single character M (without exact matching), select this box to create subprocesses for each of the remaining 42 states (in an unspecified order) after creating subprocesses for the eight states that match M. |
Field |
Description |
| Specification |
Enter a name to associate a specification with this shape. If you change the default shape name [Split for Each], the system enters the name in this field. You can either:
Enter a description in the text area beneath the specification name. When you click OK on the Properties dialog, the system creates or updates the specification. See Working with specifications in Process Modeler and Case Designer. |
Complete the Status and Tickets sections as described below.
Field |
Description |
| Work status |
Enter a work status in this field to set the status for the work item. This allows you to easily change the status at multiple points in the life cycle of a work item without adding a Utility shape to the flow for each status change. Similar to setting work item status using a Utility shape, setting the status invokes the UpdateStatus activity. Any defined tickets dependent on the status are raised, as appropriate. The selected status updates .pyStatusWork when the flow execution reaches this assignment shape. A status indicator appears on connectors to shapes that change a work item status. For example, if the shape status is set to Pending-External, the connector to that shape displays a small red flag. All transitions connecting to the shape will display the status indicator. Following are the status indicators for the four status prefixes.
|
Add a Ticket Name field to indicate the ticket(s) available at runtime. Use the Ticket to mark the starting point for exceptions that may arise at any point in the flow, such as a cancellation. The ticket is a label for a point in a flow, much like a programming "GOTO" destination.
An activity executing anywhere in your entire PRPC application can set or raise this ticket by executing the Obj-Set-Tickets method with this ticket name as a parameter. See Ticket help for other ways to raise a ticket.
The scope of a raised ticket includes all flows on the current work item that contain this ticket. If found, processing stops on that flow promptly, and resumes at the ticket point.
The system adds to the split for each shape to indicate one or more tickets are associated with this split for each shape. Assigned ticket names appear beside this icon on the flow.
Field |
Description |
| Ticket Name |
ExampleProcessing is connected to a ticket to respond to an exception, error flow or event. For example, if a mortgage application is withdrawn after some, but not all, of the application processing is completed, a mortgage processing flow can:
|
| Display Name | Optional. The Ticket Name appears by default. Enter a name to display other than the ticket name. |
At runtime, the standard function rule AddFlow() is called for each page in the Page List property, and limits this to a maximum of 500 new flows. This limit is imposed to detect and trap possible infinite loops. If required by your applications, you can increase or decrease this limit. See More about Flows.
If you choose 
For maximum user flexibility, leave this checkbox unselected if your flow accepts inputs in any order. However, this approach is typically not workable for flows that contain fork and decision shapes, or that have intermediate shapes that are not entry points.
New
Open
Pending
Resolved
Optional. Select one or more tickets that are to be available at runtime from this split for each. Add a row for each ticket. Use SmartPrompt to display all tickets available to flows in this work type.