Radio Buttons control Properties — Presentation tab

Field

Description

• Auto — the control uses the edit mode of the section or harness in which it appears. If the section is set to Read Only, then the control is Read Only. If the section is set to Auto, then the control uses the edit mode of the harness. For example, a New harness is editable, while a Review harness is read only.
• Read Only (always) — The property value is presented in read-only mode always even when the enclosing layout is in read-write mode. or based on a when condition rule or client-side test, even when the enclosing layout is in read-write mode.
• Read Only (expression) — The property value is presented in read-only mode based on a client-side test. Enter a simple expression based on the comparison of a pair of constants, properties, or both, combined by Boolean operators, such as .Color="Red". You can combine the expression with a when condition rule or another expression using the && and || operators.
  As a best practice, use the Condition Builder to edit this field. Click the Open condition builder icon to open the tool. See Using the Condition Builder to configure dynamic UI actions.
• Read Only (when) — The property value is presented in read-only mode based on a when condition. Enter the When Name key part of a when condition rule. Click the Open icon to review or create the rule.
• Editable — the control is editable, regardless of the edit mode of the enclosing layout.

For Read-only formats, select to display one of the following:

• Display text of selected option— displays the description
• Property value— displays the value of the selected property
• Another property's value— displays the value of the property that you specify. In the field that displays, select the property for which you want to display the value.

Appears only when you select Vertical Orientation.

Type the number of radio buttons that you want to display before wrapping to a new column.

Appears only when you select Horizontal Orientation.

Type the number of radio buttons that you want to display before wrapping to a new row.

Specifies the style format applied to the radio button control. Select Segmented from the list to display radio buttons as segmented buttons. Segmented buttons do not support the vertical orientation display type.

See Skin form — Components tab — Controls — Radio buttons.

Select a format (read-only) used with this property. Your selection filters the format options.

Appears if Type is Date/Time or Date.

Select one of the following:

• A DateTime format (for example: 1/1/01 1:00 AM), or a Date format (for example: 1/1/01). Both the DD/MM/YYYY and MM/DD/YYYY formats can be selected from the Date format drop-down control. The number of characters displayed is the same regardless of the date inputted (for example, 1/1/2014 displays as 01/01/2014).
  You can also create a custom date when using either of these formats. For example, entering EEE, MMM D, YY H:MM A in the "Custom" field displays as Sat, May 1, '99 2:00 PM.
• The elapsed time format (2 days, 5 hours ago or 2d, 5h ago). The system displays the value calculated as the difference between the current system date/time and the date/time value of the property. For example:

Current = 3/21/2011

Property value of 3/20/2011 = 1 day ago

Property value of 3/22/2011 = 1 day from now

The units of measure are minutes, hours, days, and years. If greater than 59 minutes, the value is represented in two units (unless the difference is exactly one unit). For example:

1 hour, 10 minutes

2 days, 20 hours

1 month, 4 days

1 year, 3 months

If less than a minute, the value is displayed as "less than a minute ago" (or from now). For the 2d, 5h ago date/time format, the past and future indications such as ago or from now can be excluded from the time stamp by selecting the Do not display past or future text check box.

To calculate months and days, the system uses today's numerical day in the previous month(s). For example, if today is March 21, one month ago was February 21, not one month, six days ago.

If the property is a Date type or the format is Date, minutes are excluded.

Appears if Type is Number.

Select left, right, or center alignment.

Appears if Type is Number.

A non-negative integer to control the number of digits presented after the decimal place. The default is Auto, which displays a maximum of three decimal places (placeholder zeroes are not added). Select to remove all digits after the decimal point and round to the nearest integer. Select All to include all digits.

Appears if Type is Number. Select one of the following:

• Round to nearest even number — Partial values are rounded to nearest even number. For example +5.5 rounds up to +6; +6.5 rounds down to +6.
• Round up to nearest — Partial values are always rounded up. For example, +5.5 rounds up to +6; +6.5 rounds up to +7.

Appears if Type is Number.

Select a label indicating the scaling you wish to apply to the number. The scales are K for thousands, M for millions, B for billions, and T for trillions. For instance, if you select Thousands, a value of 20,000 appears as "20 K." If Percentage, the value appears as a percentage sign (.8 appears as "80%").

Appears if the Type is Number.

Select a format (minus sign or parenthesis) for displaying negative numbers.

You can also specify a CSS class if you select one of the Style Ref options. By default, the class name is NegativeNumber.

Check this option to display validation errors to users at runtime. When enabled for auto-generated controls in read-only mode, if the control's validation fails, the validation message displays to the user. This option is available in the Presentation tab under Read-only Format. It is also available in the control ruleform. When enabled on the control ruleform, all controls using that ruleform will have the option enabled. Show validation messages in read-only mode is disabled by default.

Appears if Type is Number. When a symbol is specified an additional character(s) is prepended to the value. Currency automatically uses the localized currency symbol, constant uses a string, and reference uses a property value.

Select an option for representing the number as

• Currency — Formats the number as a currency using the default locale.
• Constant — A text string or character (for example, "%") ASCII character that you enter.
• Reference — A property value.

Appears if Type is Number.

Select to use a thousands' separator. Depending upon the default locale, a comma or period is used.

Appears if the Read-only format Type is Text.

Select Yes if you want the characters entered by the user to appear as a string of bullets. The input characters are initially added to the clipboard as unencrypted, clear text values. The system computes the hashed value only as the page is committed to the PegaRULES database. Thereafter, the hashed value appears in both the clipboard and the database row.

Appears if Type is Text and the control is not obfuscated.

Select a property or constant that you want to add either before the displayed property value. For example, when the user name appears, the system can automatically prepend the user's title.

Appears if Type is Text and the control is not obfuscated.

Select a property or constant that you want to add after the displayed property value. For example, when the user name appears, the system can automatically append the full mail extension to the name.

Appears if the Type is True/False.

Select to label either outcome using Text or an Image.

Appears if the Type is True/False and Show Value As Image is selected.

Select an image to label either outcome. Used with a boolean type.

Appears if the Type is True/False and Show Value As Text is selected.

Enter a text string to label either outcome. Used with a boolean type.

If the Localize? check box is selected on the section's HTML tab, a SmartPrompt Appears in the Constant field in the Parameters dialog. Select a field value rule if you plan to localize the text. If this text is to be localized, enter no more than 64 characters. A field value rule with pyCaption as the second key part and this text as the final key part is needed for each locale.

Note: As a best practice, define custom styles in the skin.

• Cell read-write classes — Type the name of the custom style, for example, custom_stylename, that you want to apply to this cell when the user form or flow action form appears in read-write mode.
• Cell read-only classes— Type the name of the custom style, for example, custom_stylename, that you want to apply to this cell when the user form or flow action form appears in read-only mode.
• Cell inline style — Type CSS code to define an inline style. As a best practice, define custom styles in the skin. See Skin form — Components tab — General — Custom styles.

Check this option to display validation errors to users at runtime. When enabled for auto-generated controls in read-only mode, if the control's validation fails, the validation message displays to the user. This option is available in the Presentation tab under Read-only Format. It is also available in the control ruleform. When enabled on the control ruleform, all controls using that ruleform will have the option enabled. Show validation messages in read-only mode is disabled by default.