Available actions and conditions

Choose an action from the list, see which options are available for the action and when you can use it. Learn which conditions you can apply.

Available actions

Click Add another action to display an action menu. By default, the menu displays the most common actions. Click All actions to see the full list of actions organized into the following categories:

Display

Action	Description
Apply conditions	Evaluates conditions on the client, based on a Keyboard event. All conditions with Run On Client enabled, such as Visible When and Refresh When, are evaluated.
Close	Provides an explicit close action for an overlay. To configure an overlay, specify the Launch > Local Action > Target as an Overlay. The overlay closes automatically when the user clicks outside of the overlay.
Menu	Displays the contents of a navigation rule as a menu. The top-level menu appears in a column below the control. Second and lower levels expand to the right. Content — Select the Name key part of a navigation rule. Format — Select the format for the navigation rule. Sub-Menu Alignment — Specify Left or Right to indicate how you want to horizontally align the top-level menu border with respect to control's image or label. For example, assume that you create a link control labeled Link Menu. If you select Right alignment, the menu's right border aligns with the letter "u" when the user opens the menu. Maximum Width — Select either of the following: Auto — The menu width at each level expands to the width of the menu item with the greatest number of characters. By default, there is no limit. Custom — The menu width at each level is determined by the number of text characters that you enter in the Ellipsis After field. For example, if you enter a value of 7, a menu item named Resolve Work truncates at Resolve and is followed by three dots. When using this action, the menu contents are generated each time they are requested. This eliminates on-load processing and ensures that the items are always up-to-date. As a best practice, use the Menu action for complex menus (such as the Actions link in a flow action) and in repeating layouts.
Post value	Posts the property value to the clipboard and refreshes the cell's contents. Post value is triggered by `Change` or `OnBlur` of the field and prior to any other event (such as a click action) initiated from a control, or from the calculation of expressions. For example: a pxButton control refreshes another section using an activity that requires three updated properties before the control can update the target section. When the user clicks the button, the properties are posted to the clipboard and are synchronized with the activity. The properties are already on the clipboard, in most cases, when the button is clicked.
Print	Starts browser-based printing, which prints the current user form as displayed. This printout may not include desired fields and may use colors, fonts, and labels that are not desired in hard copy prints.
Refresh	Refreshes the target specified in the action parameters. By default, changes are submitted before refreshing. Target — Specify the element that you want to refresh: Section — Refreshes the section. Other Section — Refreshes the section specified in the Section field. Harness — Refreshes the harness. Disable submit on refresh — Select this option if you do not want to submit edited data to the clipboard. For example, you may want to use this option to reset either a form (harness) or a section in a form by populating it with data from the clipboard – without submitting data that the user entered. Class — Specify the class of the section that you want to refresh. This option is displayed when Other Section is selected. Section — Specify the Name of the section to refresh. This option is displayed when Other Section is selected. Data Transform — Optional. Enter the Name key part of a data transform that might affect the content of the refreshed section. The prompt is based on information on the Pages and Classes tab of the current section. Parameters listed on the Parameters tab of the Data Transform form are displayed beneath this field. Enter the values that you want pass to the data transform. For more information, see About Data Transforms. Activity — Optional. Enter the Activity Name key part of an activity. Specify an activity that might affect the content of the refreshed section. The prompt is based on the Pages and Classes tab of the current section. This activity is processed after a data transform. Parameters listed on the Parameters tab of the Activity rule form are displayed beneath the field. Enter the values that you want pass to the activity.
Refresh row	Select this option to refresh a row in a grid by configuring this action on an element outside of the grid. Target — Enter a Page List or Page Group property reference: `.propertyName` Additional fields are displayed, enabling you to refresh the `Active Row`, `First Row`, or `Last Row`, or to specify an index position within a table, tree, or tree table. To refresh a specific row index, select Other in the Target field, and then specify the Row index to refresh. `.PageList.propertyName.PageList (15)`
Set focus	Sets the focus to an editable control that is bound to a property or to a specific row in a table, tree, or tree table. Target — Enter a property reference: `.propertyName` If you specify a Page List or Page Group property, additional fields are displayed, enabling you to set focus on the `First Row` or `Last Row`, or to a specific index position within a table, tree, or tree table. To set focus to an index position, select Other in the Set focus field and then use a constant or property reference: `.PageList.propertyName.PageList (15)` Examples: If a section or layout becomes visible on click of a button, set focus to an editable control in the now visible section. Set focus to the first row in a list of search results. Optionally, set Conditions. For more information, see the description for Conditions, below. Not all browsers visually indicate that a control has focus, for example, a check box or radio button. If you want to set focus from within a row in a repeating grid to an editable control outside of the grid, provide the full path to the property, beginning with the parent page, and represent it on the Pages & Classes tab of the layout containing the repeating grid.
Set value	Sets a target property to the source value. You can configure multiple properties and values. The source property can be editable or read-only. Property — Enter a property reference target. For Value List, Value Group, Page List, and Page Group properties, enter a literal, property reference or symbolic index value (subscripts): `.myList(15)` `.myGroup("Massachusetts")` Value — Enter a property reference or a literal constant (source). Click the Add a row icon to add more properties and values. Examples: Use multiple properties to populate a form quickly. Set the value of a hidden property (in a cell using the pxHidden control), which triggers an event such as making a layout visible. To set a value from within a row in a repeating grid to an editable control outside of the grid, provide the full path to the property, beginning with the parent page, and represent it on the Pages & Classes tab of the layout containing the repeating grid.
Show smart info	This option is displayed when the UI element is Icon or Link, and the Event is Hover. When you select this option, a SmartInfo pop-up is displayed. The contents of the pop-up are determined by a section that you specify, and are presented in read-only mode. Section — Select the section that you want to include in the pop-up. Title — Optional. Enter a phrase that displays in the header area.
Show smart tip	This option is displayed for a UI element when the Event is Click or Hover. When you select this option, a smart tip is displayed in an overlay. At run time, the smart tip is visible until the application user hovers or clicks away from the element. To display a smart tip with a header, select Display header. Specify the Header Source, if applicable, and the Tip Source (the body of the smart tip) as one of the following: Message, Property, Field value, or Plain text. Message — If you select Message as the header source or tip source, press the Down Arrow key in this field to select a blank or tip category message. You can enter literal strings or property references in the Value field if the specified message supports parameters. Property — If you select Property as the header source or tip source, press the Down Arrow key in this field to select the property value that you want to display. Field value — If you select Field value as the header source or tip source, press the Down Arrow key in this field to select the field value that you want to display. Plain text — If you select Property as the header source or tip source, use this field to enter the text that you want to display. Format — Select the format for the smart tip. You can style smart tips and create additional smart tip formats in the skin rule.
Spell check	Use this option to invoke the spellchecker. This tool determines which dictionaries to apply, how to operate the spellchecking algorithm, and other details.

Process Work

Action	Description
Add new work	Adds a new work item using the primary page data. Saves the new work item on the deferred list.
Cancel	Closes the current form without applying any changes.
Contents	For a cover work item, changes the form to allow users to view and navigate among the member work items. You can override a standard list view rule to control details of this display.
Enable action section	Presents the user form in review-only mode; inputs area allowed in the action section only.
Explore	For a folder work item, changes the form to allow users to view and navigate among the associated work items.
Finish assignment	Submits changes and marks this assignment as complete.
Perform action	Submits the flow action and completes the assignment if either of the following is true: The specified flow action and the current flow action have the same interface (reference the same named section). The flow action does not use HTML to render the interface (an autogenerated action with No HTML selected on form's HTML tab). Otherwise, clicking the control renders the flow action form only. For Flow Action, select the Name key part of a flow action.
Review	Presents the user form or flow action form in review-only mode; no updates are allowed.
Save	Saves the work item with Submit.
Show flow location	Known as the Where-Am-I? icon, which marks the location of the current assignment with an arrow. Requires the Work-.Perform privilege.
Show reopen screen	Shows the form in review mode but allows users to reopen a resolved work item, if they hold the Work-.Reopen privilege. Runs the standard activity Work-.Reopen or an activity of that name in your application.
Update	Redraws the form in update mode, for users who hold the Work-.Update privilege. This allows changes to previously input values that appear in sections other than the Take Action section that is presented by the flow action. This capability is not desirable in all applications, as it allows users to overwrite values that were entered previously, perhaps by other users. The Apply button on the update form sends changed user inputs to the server, but does not commit these changes. Users must select and complete a flow action to cause these changes to save.
View attachments	Presents a list of work item attachments, so that users can view or add attachments. The button is visible only for users who hold the Work-.AccessAuditTrail privilege.
View history	Displays the work item history, for users who hold the Work-.AccessAuditTrail privilege.

Launch

Action	Description
Flow in modal dialog	Allows a user to start a flow in a user form and run the process in a modal dialog. The user cannot continue work in the main user form until the modal dialog closes. You can place this control in all standard harnesses inheriting from Work-, Data- or Embed-. The modal flow must be available from the class of the section containing the control. When the user starts a modal flow, it runs on its own thread on the primary page of the harness containing the control. When the user submits the modal flow's final assignment, the flow's page merges into the parent flow primary page. The following then occurs: The modal thread is deleted. The modal dialog automatically closes. The system refreshes the section on the user form containing the control. You can update other areas on the user form by appending actions such as Refresh Section (other), or Set Value to this control. These actions are triggered after the modal closes (canceled or submitted). Specify the following: Using Page — Optional. If you want to run the flow in the context of an included section that uses either an embedded page such as .pyWorkParty(Originator), or another top-level page, enter a Page or Page List name that is defined on the section's Pages & Classes tab. When this control is used in a grid, and this field does not contain a value, then the primary page becomes the row page. Flow Name — Enter the Flow Name key part of a flow rule. Parameters — Optional. Displays parameters listed on the Parameters tab of the Flow rule form. Specify the values to pass to the flow. Use auto-generated controls within modal dialogs. This ensures accurate server processing if a modal dialog is launched from a list or grid of work items configured with actions. An action on a work item in a list is created in a temporary work processing thread. Auto-generated controls default to this temporary thread. However, non-auto-generated controls may default to use the thread of the base document for AJAX interactions, instead of the temporary thread. Using auto-generated controls ensures accurate server processing. More on modal flows: The modal displays only the action sections of the flow actions. Harnesses are not displayed. The Harness Name settings on the Assignment shape properties panels are ignored. You do not need to create modal-specific harnesses. If an assignment has multiple flow actions, only the default flow action (the one with the highest likelihood) appears in the modal dialog. A modal flow does not create its own pzInsKey or pyID. The Creates a new work object? setting on the Flow rule form's Process tab is ignored. If the parent primary page has a pyID, the system applies the modal Flow rule form's Temporary object? check box setting as follows: Selected (create temporary object) — The modal flow does not save and commit the work item between modal screens. Assignments are not created. The modal flow page is merged with the parent primary page only when the final modal assignment is submitted. This configuration is useful for screen flows, and prevents hanging assignments if the user cancels the modal. Not selected — The modal flow saves and commits the work item at each assignment, and can create assignments. This configuration is useful when the flow in the modal is routed to another operator who needs to perform the assignment. If the parent flow is a temporary work item (no pyID ), the modal flow always runs as a temporary work item, regardless of the Temporary object? check box setting. You can define styles and create custom formats for modal dialogs in the skin. Styles that you set in the modal dialog format in the skin are applied to the modal dialog templates, pyModalTemplate or pyGridModalTemplate. For more information, see Skin form — Components tab — General — Modal dialogs. To customize the modal's buttons, copy the appropriate template, standard section Work-.pyModalFlowTemplate to your application (do not change the Purpose key part). Modal flow actions use the buttons in this template. These are styled using the settings in the Standard Button format in the skin. The implementation and CSS classes for modal dialog formats differ, depending upon whether the application is rendered in HTML5 document type — standards mode or in quirks mode. For example, in HTML5 document type–standards mode, modal dialogs honor the design time width of the layout, while, in quirks mode, modal dialogs shrink to the minimum width and height possible. Drag and drop is not supported in modal dialogs rendered in standards mode. If your application contains modal dialogs and is rendered in both standards and quirks modes, generate test cases for each. Note: If this control is located in a repeating layout row, then settings for sorting, filtering, and expand-pane display will be lost when the section refreshes.
Harness	Replaces an open harness or displays a new one. Target — Define where the system will render the specified harness. Replace Current — Replaces the current tab or dynamic container contents with the new harness. In a multidocument container, this setting replaces the harness that is currently open. Pop-Up Window — Displays the harness in a new pop-up window. New Document — Opens the harness and replaces the current dynamic container contents. In a multidocument container, this setting opens the harness as a new tab. Ajax Container — Opens the harness in an Ajax container. Ajax Container Target — Optional. If no Ajax container exists, harness opens in a dynamic container. If no dynamic container exists, the harness opens in a new browser window. Default — Opens the harness in the primary Ajax container. Secondary — Opens the harness in the secondary Ajax container. Tertiary — Opens the harness in the tertiary Ajax container. Harness — Select the harness that is displayed. Tab Name — Optional. Select a property or enter a text string that identifies a tab. If this value matches the name of an open tab, the new harness replaces the tab. Otherwise, the new harness is displayed in a new tab. Used when the Target option is set to New Document or Replace Current. Class — Select the class to which the harness belongs. Read Only — Select if you want the harness contents to display in read-only mode. If set to No, you must enter a window name. Used when the Target option is set to Pop-Up Window. Submit Current — Select to save the harness data before the system replaces the harness. Used when the Target option is set to Replace Current. Window Name — Optional. Enter a name that the system uses to identify a browser window. If a window of that name is open, the new harness replaces the contents of that window. Otherwise, the harness appears in a new window. Used when the Target option is set to Pop-Up Window. Window Width — Optional. Enter a positive integer to set the window width in pixels. If you leave this and the Window Height field blank, the system replicates the dimensions of the current window. Used when the Target option is set to Pop-Up Window. Window Height — Optional. Enter a positive integer to set the window height in pixels. Used when the Target option is set to Pop-Up Window. Key — Optional. Enter the key value (pzInsKey) of a data instance that you want to open automatically as the new primary page when the harness is displayed. The system uses this value to identify the record. This action executes before a pre-activity (if defined). Used when the Target option is set to New Document. Data Transform — Optional. Enter a Name key part of a data transform that might affect the content of the harness. Parameters listed on the Parameters tab of the Data Transform form are displayed beneath this field. Enter the values that you want pass to the data transform. For more information, see About Data Transforms. Activity — Optional. Enter the key part Activity Name to cause the system to execute it before rendering the harness. This activity is processed after a data transform. Click the Open icon to open the rule. Parameters listed on the Parameters tab of the Activity rule form are displayed beneath the field. Enter the values that you want pass to the activity. Always display harness from the server — Optional. This option is only applicable to offline-enabled applications. When selected, it allows the offline-enabled application to explicitly display a harness from a server instead of the one from the client store.
Landing page	Action — Select one of two settings: Display — Opens a landing page for display. CreateNewWork — Creates a new work item based on a landing page. Name — Enter a unique name for the landing page. Attempting to open a landing page while a landing page with the same Name value is open results in the new landing page overriding the tab in which the already open landing page was displayed. Class — Enter one of the following, based on the action: If Action is set to Display, enter the class on which the harness for the landing page is based. If Action is set to CreateNewWork, enter the class on which the flow run is based to create the work item is based Harness Name — If Action is set to Display, select the harness that the landing page is built on. Data Transform — If Action is set to Display, select the data transform used to generate the landing page. Page — If Action is set to Display, specify an existing page. Read Only — If Action is set to CreateNewWork, specify the name of the flow used to create new work. Level A, Level B, Level C — Enter a value to work with a when condition on the harness to open the selected item in a specified tab on the landing page. You can also specify additional parameters and corresponding values to pass to the harness or flow.
List view	Opens a list view. Specify the class of a list view, the Purpose key part. Select Refresh, Redisplay, or Sort. Select the Header check box to display the list view header.
Local action	Loads the local or local & connector flow action and presents it as a modal dialog, overlay, or in an action section. In the Local action field, select the local action. In the Target field, select to present the local action as one of the following: Modal dialog — Requires the user to complete or dismiss the dialog before continuing work. Overlay — Launches the local action in a panel overlaying the current window. The user can dismiss it by clicking outside the overlay area or through an explicit Display > Close action, configured in the local action. Use an overlay to display information such as simple forms or flows. You can use this in conjunction with actions on other controls; for example, a Text Input box, to create an advanced picker as shown in the UI Gallery. Some of the more advanced flow action features are not supported for overlays. For example, a flow action can launch a Dynamic Container-based harness. Launching this flow action in an overlay is not supported. Replace current — Appears in the current action section (.pyActionArea). Although similar to local actions, you use Perform actions to advance the flow in those flow actions that do not have a user interface. If you are using local actions in offline-enabled applications, see also Supported actions when working offline. Note: If this control is located in a repeating grid row (from a button or icon, for example), then you should click the All actions link and select List > Open local action. Local action does not operate normally in the repeating grid environment.
Open URL in window	Using an activity that returns an HTML stream, opens a URL in a browser window. Action Use Alternate Domain — Select to specify an alternate domain for the URL to open. Select a URL in the Alternate Domain URL field. Optionally, use the Querystring area to specify the names and values of query strings for the alternate domain URL. User Primary Page — Optional. Select to invoke an activity based on the contents of the primary page when this node is selected. Data Transform — Optional. Enter a Name key part of a data transform. Parameters listed on the Parameters tab of the Data Transform form are displayed beneath this field. Enter the values that you want pass to the data transform. For more information, see About Data Transforms. Activity — Select an activity to return an HTML stream that displays in the opened window. This activity is processed after a data transform. Click the Open icon to open the rule. Parameters listed on the Parameters tab of the Activity rule form are displayed beneath the field. Enter the values that you want pass to the activity. Window Properties Window Name — Specify a text string to define the name of the opened window. Replace History — Select to erase the history of the opened browser window. Height — Enter a numeric value to represent the height in pixels of the opened window Width — Enter a numeric value to represent the width in pixels of the opened window Top — Enter a numeric value to represent the offset in pixels from the top of the screen Left — Enter a numeric value to represent the offset in pixels from the left of the screen. Resizable — Select to enable the opened window to be resized. Scrollbars — Select to enable scrollbars in the opened window. Location Bar — Select to enable the location bar in the opened window. Menu Bar — Select to enable the browser's menu bar in the opened window. Status Bar — Select to enable the browser's status bar in the opened window. Tool Bar — Select to enable the browser's tool bar in the opened window.
Report definition	Executes the retrieval and sorting operations, but not the formatting and display processing, of a report definition. Report actions Run Report — Runs the report specified in the Report name field. Run shortcut: — Opens a report shortcut to retrieve the specified report. New report: — Creates a new report Target — Define where the system will render the specified report. Pop-up window — Displays the report in a new browser window. Replace current — Replaces the current tab contents with the new report definition. New document — Opens the report definition in a new tab that uses a separate thread and does not overwrite contents of a previously run report.
Wizard	Launch a wizard based on key part Label and the class of the wizard (class name begins with `PegaAccel-` ). Optionally, specify parameters such as operator ID, status, and so on.

Get Work

All actions in the Get work section require a target destination:

Default — Sets the default container as the target.
Dynamic container — Sets a dynamic container as the target.
Ajax Container — Sets an Ajax container as the target. If no Ajax container exists, the action runs in a dynamic container. If no dynamic container exists, the action runs in a new browser window.
- Default — Runs action in the primary Ajax container.
- Secondary — Runs action in the secondary Ajax container.
- Tertiary — Runs action in the tertiary Ajax container.

Action	Description
Create work	Creates a new covered or non-covered work item. This action is called with a primary page that inherits from the `Work-` base class. Create work commits the new work item if no flow execution exists. If the action starts a flow execution, the commit operation occurs when that flow execution creates an assignment.
Get next work	Returns the next assignment for the operator to complete. This assignment can either come from the operator's worklist or from one of the work queues to which they have access.
Open assignment	Opens an assignment that is based on its key value pxAssignmentKey.
Open work by handle	Opens work that is based on the internal key that uniquely identifies the instance.
Open work item	Opens work that is based on the work item ID.
Re-open work item	Reopens a resolved work item, for users who hold the Work-.Reopen privilege. Runs the standard activity Work-.Reopen or an activity of that name in your application.

List category

Use these actions for repeating layouts, only.

Action	Description
Add child	Adds a child item beneath the selected row or branch or in a repeating grid or tree.
Add item	Adds a row to a layout, above or below the current row.
Delete item	Deletes a row in a layout.
Edit item	Enables editing of the selected item in the layout. Not available if the repeating layout Edit Mode is set to Read Only.
Open local action	Displays the flow action that you specify. Flow Action — Select the flow action that will be invoked. After Action — Select Refresh Current Item (recommended) to refresh only the current row after the flow action has ended. In most cases, leave this selection (default). Select Refresh All Items to refresh the entire layout. Use auto-generated controls if you plan to configure actions on a list of work items. An action on a work item in a list is created in a temporary work processing thread. Auto-generated controls default to this temporary thread. However, non-auto-generated controls may default to use the thread of the base document for AJAX interactions, instead of the temporary thread. Using auto-generated controls ensures accurate server processing.
Open selected item	Opens the item selected in the layout.
Refresh current row	Refreshes the content of the active row in the active grid. Disable submit on refresh — Select if you do not want to submit edited data to the clipboard. For example, you may want to use this option to reset the row by populating it with data from the clipboard, without submitting data that the user entered.
Refresh list	Refreshes the content of the repeating grid or tree based on data in the clipboard. Maintains the current page, filter, or sort.
Set focus	Sets the cursor focus to the `Current Item`, `Next Item`, or `Previous Item` in the repeating layout. `Current Item` is the default action for Click events. You can use Set focus with Keyboard events to enable users to navigate within a repeating grid using the Up and Down arrow keys. For example, configure the `Keyboard` Event `Up` to `Set Focus` to the `Previous Item` in the grid and the `Keyboard` Event `Down` to `Set Focus` to the `Next Item` in the grid. Use the `Keyboard` Event `Enter` to take an action, such as edit the selected item (Handle List Items > Edit Item.) If you want to set focus from within a row in a repeating grid to another grid or to an editable control outside of the current grid, select `Set Focus` in the Display category and provide the full path to the property, beginning with the parent page, and represent it on the Pages & Classes tab of the layout containing the repeating grid.

Other

Action	Description
Invoke action	Select to specify a clipboard page that contains the action that you want to perform when the specified events occurs. When the event occurs, the clipboard page is passed into the action and the action is performed. This is supported for the following actions: Open rule by handle Open work by handle Get next work Show harness Open landing page Create new work Open rule by keys Open rule by class name Open rule specific
Log off	Log out of the system.
Manage guided tour	Configures a control to start, continue, or dismiss a guided tour. Action to take – Select whether the action starts the tour or dismisses the tour. Always continue where left off – Select this check box to continue the tour where the user exited, if the user exited the tour at an intermediate stop. Tour applies to – Specify the class in which the tour is defined. Tour name – Specify the name of the tour to run. Override default tour stop container template – Select this check box to override the default template. Specify the template that you want to use in the Template name field.
Open rule	Opens a rule that takes the pzInsKey value as its parameter. Handle — A pzInsKey key value in the rule you want to open. Resolve By — To determine how the system locates the rule, enter one of the following: `Name` – A Property Name key value. `Handle` — Value entered in the Handle field. `Handle By Condition` — A when condition that qualifies the value entered in the Handle field.
Open rule by keys	Opens a rule by its class and the class key values. Specify the class that has keys defined. Select values for the Keys specified on the Class rule form General tab.
Open rule by name	Opens a rule based upon the rule type (concrete class derived from the Rule- base class) and a Property Name key part.
Run activity	Runs the activity you specify in the Activity field. Enter the Activity key part. Parameters listed on the Activity rule form's Parameters tab appear beneath the field. Enter the values you want pass to the activity.
Run data transform	Runs the data transform that you specify. Page — Select `Auto` to keep the primary page context. Select `Other` to use another page context. Name — Appears if you select `Other` on the Page field. Enter the page name. Data Transform — Enter the Name key part. Parameters listed on the Data Transform form's Parameters tab appear beneath the field. Enter the values you want pass to the data transform.
Run script	Calls a custom JavaScript function or a Pega Platform API. Select Resources > JavaScript API to view the JavaScipt API. Function Name — Select the property or literal reference that contains the function you wish to run. (In the Control form, only @ baseclass properties appear). Enter the JavaScript file using this function on the Harness rule form's Scripts and Styles tab. The `Run Script` action instructs the browser to find a JavaScript function with that name and then pass those parameters. If the same function is used in multiple files in the list, the last file is used (the last function overwrites the others with that name). The browser uses the defined function when it executes the JavaScript file. Do not use ( ) in the function or parameter names. You can specify a property that stores the name of the function. To use javascript object references, prepend `script:` or `javascript:` to name of the javascript function. For example `script:window.alert` Use `“ ”` to specify literal values. You can also use `script:MyObject.MyField` to access objects in function parameters. Parameter area — Optional. Enter parameter names and values (constants or properties). Order is important; if necessary, reorder the list by selecting a row and moving it.
Toggle Mobile / Full Site	Switch between the standard view of the site and the view optimized for mobile devices.

Conditions

After you add an action to a set, you can select one or more conditions that determine whether (or how) the system takes action when the user performs the control event.

Note: If the UI Element is Check box, you cannot apply conditions.

When

Optional. To define a condition, click the Add a row icon. Select one of the when conditions in the drop-down list. Enter input parameters if required. When you click Submit to close the dialog, a condition icon appears in the condition column indicating that the behavior has an associated condition.

Enter another row if you want to use multiple conditions. Select either an "AND" or an "OR" operator for the second condition. You can add conditions using the operators of the same type. That is, if the first operator is "AND", all the following operators are "AND."

The conditions that appear in the drop-down list depend upon whether UI element is editable or read-only. Select one of the following when conditions:

Active — The field has focus.
Associated Property — Property value specified in the control's Cell Property panel (Value of associated property option) is equal, greater, or less than another property value.
Empty — The control does not contain a property value.
Inactive — The field does not have focus.
Not Required — An input field that is not required.
Other Property — Property value given for the Value of a different property option on this tab is equal, greater, or less than another property value.
Populated — The control contains a property value.
Required — An input field that must have a non-blank value. The Required condition checks whether the field is required, but does not consider the value of the input field. Most forms label a required field with an orange asterisk.
When Rule — A when condition that you configure.