Published Release Notes

Open ports required for cluster communication

In a Pega 7 system, there can be multiple servers, or nodes, and each node can contain multiple JVMs.  In Pega 7.1.7, the port range 5701-5800 needs to be left open for cluster communication.   The number of available ports in this range needs to be greater than or equal to the greatest number of JVMs on any one node in the cluster.  So for example, if there are 3 JVMs on one node, and 7 JVMs on another node, there need to be at least 7 ports available.  By default, the system will begin with port 5701, and then look for the next port in the sequence (5702, followed by 5703).

If these ports are not available, you will see the following error:

ERROR   - PegaRULES initialization failed. Server: ABCDEF123

com.pega.pegarules.pub.context.InitializationFailedError: PRNodeImpl init failed

< . . . Java dump here . . . >

Caused by: com.hazelcast.core.HazelcastException: ServerSocket bind has failed. Hazelcast cannot start! config-port: <port>, latest-port: <port>

Using Kerberos authentication with your database

Pega 7 supports Kerberos functionality. Kerberos is a computer network authentication protocol which allows nodes communicating over a non-secure network to prove their identity to one another in a secure manner. 

To use Kerberos for authentication, you must use the command line to install or upgrade Pega 7.

To use Kerberos authentication:

1.  Change the setupDatabase.properties file.

a.  In the “Uncomment this property section” of the file, uncomment the jdbc.custom.connection.properties property.  Based on your security infrastructure, different properties may be required as parameters to this property; provide the needed properties as semicolon-delimited name/value pairs:
 

jdbc.custom.connection.properties=prop1=val1;prop2=val2;prop3=val3;
 

Example:  For an installation on a MSSQL database server from a Windows client machine (where both machines belong to the same Windows domain), using the Microsoft JDBC driver, the property may be set as follows:
 

jdbc.custom.connection.properties=integratedSecurity=true;

b.  Comment out all the username and password properties where they occur in the jdbc.custom.connection.properties file, so that they appear as follows:

# pega.jdbc.username db username
# pega.jdbc.password db password

[lines removed here]

# pega.jdbc.username=ADMIN
# pega.jdbc.password=ADMIN

2.  Set up your database to enable Kerberos functionality.  This may include additional vendor-specific JDBC driver configuration, or other setup procedures.  Check the documentation from your database vendor to determine what Kerberos setup is needed for your database.

3.  Run the command line installation or upgrade by following the instructions found in the Pega 7 Deployment guides.

Run cleanup.bat/sh script only before upgrading

Prior to upgrading the rulebase, you can optionally run the cleanup.bat/sh script to remove older rules from the database.

Run this script before you upgrade your rulebase, or the script may delete needed rulesets. For more information about running the cleanup.bat/sh script, refer to the Upgrade Guide specific to your release version.

Recommended heap sizes

The heap is a storage area in the Java virtual machine (JVM) allocated for both short-term and long-term (shared) object storage. If the server does not have enough memory allocated to run Pega 7, the system can hang without an error message. If this occurs, your values need to be higher than the recommendations based on your server hardware and the number of other applications on the server.

Pegasystems recommends using these settings:

• Initial Heap Size (Xms): 1 GB
• Maximum Heap Size (Xmx): 12 GB (8 GB minimum)

If your application server is using the Oracle JVM, also add the PermSize and MaxPermSize settings:

• PermSize (-XX:PermSize): at least 256MB
• MaxPermSize (-XX:MaxPermSize): at least 512MB

Set the JVM memory options to increase the amount of system memory allocated to the application server running Pega 7 by selecting Designer Studio > System > Operations > System Management Application and then selecting a listed node.

See the Pega 7.1.7 Installation Guides for more information about how to make these setting changes.

When using Oracle 12.1.0.1, left outer joins in reports may return incorrect results

When using  Pega 7 with Oracle 12.1.0.1 , reports that use left outer joins may return incorrect results.

This is an Oracle known issue.  To resolve this behavior, upgrade to Oracle 12.1.0.2, apply the Oracle patch 16726638 by requesting it directly from Oracle, or, for Microsoft Windows installations, apply Windows Bundle patch 12.1.0.1.15 or later.

For more information in this behavior, see: https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=392085808201943&id=1957943.1

Unclear error message when saving shared class instance in tenant layer

If you attempt to save a shared class instance from the tenant layer, Pega 7 displays this message:

This record has x errors. Save Failed: There was a problem saving an instance of class: Error Code: <none> SQL State: <none> Message: <none>

You cannot save a shared instance from the tenant layer if that instance cannot be overridden.

Microsof Internet Explorer 9 (IE9) may display a script error when clicking a Help button

A script error may be displayed when clicking a Help button when script error notification is turned on in the browser. As a work around, uncheck the Display a notification about every script error option in the Advanced tab of the Options dialog box in Microsoft Internet Explorer 9.

Custom database (DB) triggers are dropped during upgrade

The latest version of Pega 7 improves performance by no longer using database triggers to assist with System Pulse and Data-Rule-Summary processing, which is now done within the Pega 7 engine. As a result, DB triggers are no longer installed on either the pr_sys_updatescache or pr4_rule_vw tables.

When upgrading to the latest version of Pega 7, if you had previously implemented a custom database (DB) trigger on these tables, or a custom DB trigger that refers to these tables, it is removed during the upgrade process. No custom triggers are removed unless they reference these tables.

If you have custom DB triggers that reference the pr_sys_updatescache or pr4_rule_vw tables and perform other processing, those triggers must be reimplemented. When doing so, you must be careful to not modify the pr_sys_updatescache or pr4_rule_vw tables.

For more information, see Startup check removes custom DB triggers.

Updates no longer require redeploying the prweb.war file or the application server-specific EAR file

Updating from Pega 7.1.7 to later versions of Pega 7 no longer requires that you redeploy the prweb.war file or the application server-specific EAR file.

Note that upgrades from versions prior to Pega 7.1.7 still require that you redeploy these files.

Number and text input controls on Android devices may not display the correct keyboard

When running a Pega 7 application on a device using the Android operating system, pxNumber and pxTextInput controls may not display when using the desired on-screen keyboard. This happens when the number or text input type is set to number.

At design time, the input type is selected in the Editable Format section of the Presentation tab in the Cell Properties panel for a pxNumber or pxTextInput control. Due to a known limitation in some versions of the Android OS running on some devices, the keyboard displayed at run time may not support entry of decimal values when a Number type keyboard is specified.

To resolve this issue, use the Phone type when numbers with decimal values may be required. Using the Phone type displays a numerical phone keyboard. The Android phone keyboard includes both commas and periods so that decimals may be entered.

The Phone type selected in the Presentation tab of a Number control

Note that this issue only occurs on Android devices. It is recommended that applications for iOS continue to use type=“Number”.