SR-D71408 · Issue 534932
DIrty check flag triggered by adding columns and filters
Resolved in Pega Version 8.1.8
If a report was edited and closed without saving, the dirty check worked as expected. However, if new columns or filters were added and the report closed without saving, the dirty check did not appear. This has been resolved by updating the check logic.
SR-D53176 · Issue 541793
Error when adding function filter will persist
Resolved in Pega Version 8.1.8
When an exception occurred while adding a filter in the report viewer, the error was shown but cleared due to an immediate refresh of the parent section. Analysis found that step2 of pzGetFiltersFromContent was failing, after which the error was shown, the section reload happened, and the error disappeared. To resolve the error being cleared prematurely, the pzOnLoadReloadReport control has been modified so that when there are messages on the top level page (pyReportContentPage), a parameter will be set on HarnessContextMgr to not to clear them during the next refresh call.
SR-D76204 · Issue 543591
Index conflict resolution logic updated
Resolved in Pega Version 8.1.8
After configuring a dedicated index on delivered Class - PegaCA-Interface-Contact, trying to generate the index resulted in an error indicating a type conflict in delivered classes/properties. This has been resolved by updating the conflict resolution logic.
INC-174116 · Issue 662039
Added reporting on descendant classes for framework
Resolved in Pega Version 8.6.3
Reporting on descendant classes was not working as expected. In a report definition with "Reporting on descendant classes enabled," the framework class and implementation class each refers to two different tables that use the same names but belong to two different schemas. Investigation showed the generated SQL query was not adding the necessary UNION clause, and the records from the descendant classes were missing when running the report on framework class. This was a missed use case and has been corrected.
INC-181684 · Issue 665483
Privileges adjusted for RetrieveReportData
Resolved in Pega Version 8.6.3
In recent versions of Pega, pxRetrieveReportData was secured with @baseclass AllFlows and OpenDeveloperForm privileges. However, this can interfere with setting up roles after update. To resolve this, the privilege restrictions have been removed from pxRetrieveReportData as it is already protected by ABAC/RBAC.
INC-182193 · Issue 674802
Drilldown report takes original report prompt parameters
Resolved in Pega Version 8.6.3
When a report had prompt filters configured and the summary report definition was executed by giving prompt filters, drilling down to one of the records in the summary report display and then looking at the reports displayed and summarized on a column showed a mismatched count. This was found to be a very specific edge case that involved calling the "Summarize" action from a report column within a drilldown report when using a custom filter section and "prompt for filter changes" on the main report. Filters from the custom filter section were being propagated to the drilldown report when summarizing, but the drilled-down-and-summarized report itself had not been refreshed on the client side to reflect this. To resolve this, the actions have been copied from pyDefaultCustomFilterApplyCancel and applied to the Summarize selection in pzGridMenuNavRule.
INC-182381 · Issue 664455
Updated dedicated index reindexing check
Resolved in Pega Version 8.6.3
Attempts to reindex were not successful after a dedicated index failed with the error "Not enough active shards for index work to meet write consistency of quorum". This has been resolved by updating the system to validate the cluster state for the dedicated index name instead of the work index name when performing a dedicated index Reindex.
INC-182534 · Issue 677143
Resolved Sub Report Filter Criteria error
Resolved in Pega Version 8.6.3
After upgrade from Pega 7 to Pega 8, Sub Report filter criteria were throwing a runtime error when pyPartyFullName from Index-WorkPartyUri was used as a filter condition. Under certain conditions, Sub Report and Main report use class joins with the Index-WorkPartyUri table to get the count of cases. In this case, the error was caused by the ValidateFilterValue edit rule passing the wrong class name for the sub report class join property. This has been resolved.
INC-184303 · Issue 670403
Runshortcut updated to allow direct invocation for reporting
Resolved in Pega Version 8.6.3
After update, reports were not running as expected. This was traced to the checkbox for 'Allow direct invocation from the client or a service' not being checked in the final rule, preventing reports from working if they were called using the activity pxRunshortcut. This has been resolved by resetting the checkbox to checked.
INC-185727 · Issue 668210
Updated replica management for search clusters
Resolved in Pega Version 8.6.3
When using a cluster with two Universal nodes in the cluster, a daily restart process where the second node was not started until the first was fully up resulted in Search initialization failing for the first node while becoming active on the second node. This was traced to the methods used in increasing and decreasing replicas. This has been resolved by revising the handling of ElasticSearch node lifecycle and replicas through a new option "Dindex.searchNodeCount " which includes a specification for the number of expected search nodes. If this option is not present, the old method will be used.