SR-D71408 · Issue 534932
DIrty check flag triggered by adding columns and filters
Resolved in Pega Version 8.1.8
If a report was edited and closed without saving, the dirty check worked as expected. However, if new columns or filters were added and the report closed without saving, the dirty check did not appear. This has been resolved by updating the check logic.
SR-D53176 · Issue 541793
Error when adding function filter will persist
Resolved in Pega Version 8.1.8
When an exception occurred while adding a filter in the report viewer, the error was shown but cleared due to an immediate refresh of the parent section. Analysis found that step2 of pzGetFiltersFromContent was failing, after which the error was shown, the section reload happened, and the error disappeared. To resolve the error being cleared prematurely, the pzOnLoadReloadReport control has been modified so that when there are messages on the top level page (pyReportContentPage), a parameter will be set on HarnessContextMgr to not to clear them during the next refresh call.
SR-D76204 · Issue 543591
Index conflict resolution logic updated
Resolved in Pega Version 8.1.8
After configuring a dedicated index on delivered Class - PegaCA-Interface-Contact, trying to generate the index resulted in an error indicating a type conflict in delivered classes/properties. This has been resolved by updating the conflict resolution logic.
INC-183960 · Issue 675870
Condition check added to trigger search update
Resolved in Pega Version 8.6.4
Following work done to update deleting attachments for cases created through an email bot, search indexing was not updating automatically and a manual re-index was needed to allow the global search to work. This has been resolved with the addition of a condition check which will update the case when there is a delete operation done on the link page.
INC-198725 · Issue 707482
Elasticsearch will split queries to avoid URL length limits
Resolved in Pega Version 8.6.4
Elastic Search Functionality was not working and showed the status as Offline. Investigation showed that when an external Elasticsearch setup had an index prefix length = 200 and a large number of dedicated indexes, the error "too_long_frame_exception, reason: An HTTP line is larger than 4096 bytes" was generated. In this case, the system was working with approximately 87 dedicated indexes and the name for each of them was sent over the URL, resulting in this error message. This has been resolved by updating the system to split queries so as to not exceed the HTTP line limit in Elasticsearch.
INC-200973 · Issue 699266
Added handling for client-side validation errors in sub-reports
Resolved in Pega Version 8.6.4
When a sub-report was trying to access externally mapped fields or an optimized page property by JOIN of another class, the main report was unable to validate the Page property. This has been resolved by updating the activity code to handle client-side validation errors on main reports attempting to access the externally-mapped Page properties of another class in the sub-report.
INC-201625 · Issue 698655
Updated variable handling for filter logic to avoid reuse
Resolved in Pega Version 8.6.4
When adding the property "ItemStatus" as a filter for a report, the validation message: "This property does not exist or has no column mapping" appeared. This was traced to an empty caption for a class join property used in the filter due to RRFilters_Logic reusing the strFieldName variable, and has been resolved by updating the variable handling to use a unique name, strPropName.
INC-202447 · Issue 698659
Updated variable handling for filter logic to avoid reuse
Resolved in Pega Version 8.6.4
When adding the property "ItemStatus" as a filter for a report, the validation message: "This property does not exist or has no column mapping" appeared. This was traced to an empty caption for a class join property used in
INC-202480 · Issue 699082
Resolved report filter section freeze
Resolved in Pega Version 8.6.4
When opening a report with a count column, changing the order of one of the report columns resulted in the report freezing and requiring the report to be closed and re-run. This was traced to a double filter popup appearing that did not close after the column sorting, which happened if the report definition was configured as a summary with an aggregated column such as "Count” combined with a "Do not display group headings" setting on the Report Viewer tab. To resolve this, a new step has been added in the Activity pzPopulateSortOrder to call the pzCancelFilterLogicChanges activity.
INC-205075 · Issue 698741
Updated variable handling for filter logic to avoid reuse
Resolved in Pega Version 8.6.4
When adding the property "ItemStatus" as a filter for a report, the validation message: "This property does not exist or has no column mapping" appeared. This was traced to an empty caption for a class join property used in