INC-184109 · Issue 671194
Handling updated for customDateTime formatting
Resolved in Pega Version 8.4.6
When a feature date was entered, for example as 2021/07/29 12:00:00 AM, changing any other property caused the time to be off by 4 hours and display as 2021/07/28 08:00:00 PM. Investigation showed this was caused by the parameters being passed in an incorrect order while calling pega.ui.Formatter.formatDateTime() in combination with customTimeZone, and has been resolved.
INC-184311 · Issue 667471
Time value handling updated for IW locale
Resolved in Pega Version 8.4.6
The error -"0undefined/0undefinedundefinedundefinedundefinedundefined is not valid time of day value" appeared when using the 'IW' operator locale and the time field was changed. This was traced to a missed condition check for the IW locale while preparing the selected time value from the dateTimeFormatString, and has been resolved.
INC-184443 · Issue 668438
Time value handling updated for IW locale
Resolved in Pega Version 8.4.6
The error -"0undefined/0undefinedundefinedundefinedundefinedundefined is not valid time of day value" appeared when using the 'IW' operator locale and the time field was changed. This was traced to a missed condition check for the IW locale while preparing the selected time value from the dateTimeFormatString, and has been resolved.
INC-185563 · Issue 670847
"Manage content" dialog box tab index is consistent
Resolved in Pega Version 8.4.6
The tab ordering for the "Manage content" (document upload) dialog box was not consistent. This has been resolved by updating pzModalTemplate to list the submit, cancel, etc, buttons in a consistent order.
INC-189047 · Issue 674761
Session timeout adjusted for use with Apple Safari
Resolved in Pega Version 8.4.6
A configured browser session logout timer was not working with the Apple Safari browser. This was traced to browser-specific handling for self.location.href and has been resolved by adjusting the logic and moving it inside a setTimeout to improve cross-browser compatibility.
INC-192075 · Issue 680775
Required field error message shown for Anypicker control
Resolved in Pega Version 8.4.6
Certain Anypicker controls set to required were not showing the expected error message "Value cannot be blank" in the UI when the field was submitted as blank. This has been corrected.
INC-192812 · Issue 677347
Property mapping with autocomplete control corrected
Resolved in Pega Version 8.4.6
Selecting from a list populated by autocomplete did not set the property value on property(ManagerialUserGroupLabel) which was mapped to the autocomplete control. This was traced to modifications made earlier which were intended to improve the handling for populating properties with keyboard controls, and has been resolved by reverting the previous changes. Future work is planned around the original keyboard control issue.
SR-A8538 · Issue 222591
RepeatIndex generation improved
Resolved in Pega Version 8.1
Controls in a triple layout included in a row repeat did not have matching unique IDs and label for attributes. This was due to incomplete generation of the repeatindex for the ID, and has been fixed.
SR-C4920 · Issue 347563
Grid Header checkbox behavior modified for consistency
Resolved in Pega Version 8.1
Unexpected behavior was seen when clicking on the Checkbox present in Header: all other checkboxes changed their state (which was expected), but if the the Readonly checkbox was checked it was also changing the state the first time (which was not expected). After this first state change, the read-only checkboxes were not changing state (which is correct behavior). Previously, the behavior of Select All / CheckAll checkboxes was as follows: If the SelectAll / CheckAll checkbox is checked - Individual checkboxes are checked only when they are NOT disabled If the SelectAll / CheckAll checkbox is unchecked - Individual checkboxes are unchecked irrespective of their DISABLED state The behavior has now been changed as below: If the SelectAll / CheckAll checkbox is checked - Individual checkboxes are checked only when they are NOT disabled If the SelectAll / CheckAll checkbox is unchecked - Individual checkboxes are unchecked only when they are NOT disabled
SR-C7762 · Issue 350154
Commas removed from filter values to resolve validation errors
Resolved in Pega Version 8.1
When using a Grid layout configured in a section rule, clicking the Filter option and entering a comma separated value in the "To" field in a decimal-type column resulted in an "Invalid numeric range" option message. No error was seen if comma separated values were entered in both the "To" and "From" fields. Because the checkRangeFilter() function in ui_grid.js uses parseFloat() API to extract the decimal content entered in the search boxes, decimals after commas are ignored and validation failed due to the fields not matching. This issue has been fixed by implicitly removing any commas entered by the user.