SR-D79178 · Issue 543310
SameSite cookie setting added for Mashup support in Google Chrome v80+
Resolved in Pega Version 8.3.3
The Google Chrome browser version 80 and above now treats SameSite with a blank value as "Lax" by default, causing mashup scenarios to break. In order to compensate for this change, support has been added for setting SameSite=None in Cookie Settings; this value automatically includes the “secure” cookie flag, which enforces HTTPS for the Pega server and mashup. For mashups to work, SameSite should be set as None. Create a Dynamic system setting in the Pega-Engine RuleSet with the name “security/csrf/samesitecookieattributevalue” and the value "None" and restart the server. (The SameSite value "None" works only in secure HTTPS connections.)Note: The SameSite cookie may be set to None/Lax/Strict, based on the requirement. For cookie requirements other than mashup, it should be set as either Strict or Lax, depending upon your application.
SR-D92352 · Issue 553615
Completed onChange will reset FileInput value to null
Resolved in Pega Version 8.3.3
When attaching a file using the "Select File" button, it was not possible to attach the same file after deleting it. Re-attaching the file worked as expected when using Drag and Drop. Investigation showed that the onchange event occurred only when the value of an element was changed, so in this case trying to attach the same file did not change the value of the element and did not fire the onchange. To resolve this, the value of FileInput in pzMultiFilePath Control will be set to null at the end of the onChange event so that an onChange event will be triggered next time even if the same file is added.
SR-D73536 · Issue 538401
FetchApplicationLogo modified to Filter by rule resolution
Resolved in Pega Version 8.3.3
It was observed that the Report Definition rule "pzFetchApplicationLogo", referenced by Activity rule "pzLoadApplicationLogo", always returned the older version of the Binary File "webwb • pyapp-logo • svg" because it had been set to retrieve a maximum of one record and in this case the results were sorted in an order where the oldest record was at the top. As the Report Definition did not indicate any sorting, most DBMS were returning the results in no particular or predictable order. To resolve this, "Filter by rule resolution" has now been enabled for Report Definition pzFetchApplicationLogo.
SR-D84480 · Issue 546187
FilterHistory decision tree used for audit log status
Resolved in Pega Version 8.3.3
Attempting to use the “FilterHistory” decision tree in the work class to return value “false” for “pyCloseOpenAssignmentsOnResolution” to hide the “pyCloseOpenAssignmentsOnResolution” field value (“Unfinished assignments were cleaned up by the system after the completion.. ”) from history was not working as expected, and still returned the audit message. This was due to the system setting this AuditNote parameter within the “pzProcessResolutionStage” activity, where Param.UpdateHistory was set to true always. In order to support more flexibility, the Param.updateHistory paramter in step3 of the pzProcessResolutionStage activity will be set based on the FilterHistory decision tree. When set to false in FilterHistory decision tree, pyCloseOpenAssignmentsOnResolution will be set as false and audit will not be logged.
SR-D90528 · Issue 550665
Localization added to File upload alerts
Resolved in Pega Version 8.3.3
When uploading files as part of adding attachments, error and warning messages were displayed as alerts in English despite using localization. This was traced to the pzMultiDragDropControlStandard control rule having the HTML alert messages hard coded instead of using field values which could be localized. To resolve this, field values have been created for the messages related to DragDropMaxSize, FileNotExistMessage, FileUploadSupportMessage, and UnableToLoadFileMessage.
SR-D84754 · Issue 548163
Resolved erroneous problem assignment error
Resolved in Pega Version 8.3.3
If a user processed a work item while the SLA agent was also attempting to process it, it sometimes resulted in an assignment with the error: "Error: Flow Not At Task." In this scenario, an error message was displayed stating that "Assignment already completed" even though the assignment was not yet finished, causing confusion. Investigation showed that in cases where the success indicator was -28, the assignment was marked as problem assignment even though it was processed. To resolve this, the system has been updated to skip marking the assignment as a problem when the success indicator is -28.
SR-D87898 · Issue 552588
SaveAttachment Activity in Data-WorkAttach-URL updated
Resolved in Pega Version 8.3.3
A 'when' condition was not properly evaluated for Activity SaveAttachment (CL:Data-WorkAttach-URL ), causing the Next assignment screen to not be displayed. This has been resolved by modifying the handling of Page Names used as activity parameters to remove the use of the specific PageName "pyAttachmentPage" in the operation and make it generic to Primary in the SaveAttachment Activity of CL: Data-WorkAttach-URL.
SR-D68235 · Issue 534781
Stale WorkSearchPreference data cleared when switching apps
Resolved in Pega Version 8.3.3
The D_pyWorkSearchPreferences data page data was not refreshing while switching between apps, causing stale data to be populated under the case search dropdown for all the applications after switching the application from one to another. This has been resolved by removing the D_pyWorkSearchPreferences data page as part of pzProcessApplicationSwitch.
SR-D88141 · Issue 550008
TemplateButton field correctly set read-only
Resolved in Pega Version 8.3.3
When a control was added to a section using the DX API, a pyTemplateButton field was added to the XML definition of the section with read-only set to 'false'. This has been corrected so the pyTemplate Button field does not allow input.
SR-D76291 · Issue 547839
Updated retry logic for S3 AddAttachmentFromEmail
Resolved in Pega Version 8.3.3
When using the AddAttachmentFromEmail activity with S3 repositories, performing an obj-save on the data-workattach-file page executes a deferred save while also saving the file into the repository. if the data was inserted into S3 successfully but encountered an issue when saving the related data-work-attach-file page, the system was trying to call the save operation again. This tried to insert the duplicate attachment again to S3, causing an error on that side of the process. To resolve this, the duplicate Obj-Save functionality in AddAttachmentFromMail Activity has been removed.